The Lifesaving Alarm (Model: 4BDM-1001) is a safety device designed for use by firefighting rescuers in disaster situations. It monitors the wearer’s movement and triggers alarms if inactivity is detected. The alarm can be manually triggered or automatically activated based on motion, temperature, or impact detection.
Key Features:
Motion Detection: Triggers alarms if no movement is detected after a preset time.
Manual and Automatic Alarms: Can be activated manually or automatically when certain conditions are met.
Temperature and Impact Sensors: Alarms are triggered if the ambient temperature exceeds the set threshold or if a strong impact is detected.
OLED Display: Shows device status, battery level, and other information.
Durable Design: Waterproof (IP68), heat- and impact-resistant, with an audible alarm over 95 dB.
Specifications:
Size: 55(W) x 87(H) x 30(D) mm
Battery: 3.7V lithium polymer, rechargeable in 4 hours
Operation Time: 100 hours in standby, 20 hours in alarm mode
Usage:
Power On/Off: Remove or insert the safety pin to power the device on or off.
Alarms: Automatic or manual alarms can be triggered based on movement, temperature, or impact.
Settings: Users can configure alarm timing, sensitivity, and temperature thresholds.
This device enhances safety by providing real-time x-alerts in dangerous situations.