1. This Charger is only applicable to battery VOLTA models manufactured by LG Energy
Solutions, Ltd.
2. The charger is connected to the BMS of battery by CAN communication to control and
supports constant current mode(CC Mode) and constant voltage(CV Mode) of charging.
3. It takes a certain amount of time to reach the target current during CC Mode.
In CV Mode, the charger is charged based on voltage and finishs charging by the
charging termination conditions received from BMS.
4. Charging control is performed based on the limited voltage and current provided by
BMS in both CC Mode and CV Mode.
HOW TO USE
< Start of Charging >
1. Connect the provided power cable to the inlet of the charger
2. Connect the charging connector to the connector of a scooter.
3. Plug in the outlet to supply AC power.
4. Turn on the power switch of the charger.(O → I)
< End of charging >
1. After Fully Charged, please turn off the power switch of the charger.(I → O)
2. Unplug the power plug from the outlet.
3. Unplug the charging connector from the scooter.
4. Disconnect the power cable to the charger.
Power |
Rated power |
1200W |
Input Voltage |
AC 220~240V , 1Phase, 50/60Hz |
|
Output Voltage |
96V |
|
Output Current |
8.84A |
|
Enclosure |
Material |
Al, PCB, CIRCUIT |
Operating Tempature |
-20~60℃ |
|
Cooling |
Fan |
|
Dimension |
300x170x90 mm |
|
Weight |
3kgs |
|
Cable Length |
1270mm (±3.0%) |
The person in charge
HYUNGWOO SHIMAddress
13 Paldal-ro, Buk-gu, Daegu (41498)큐알
Please enter the text on the left image to prevent automatic input.
0 / 4000