Effects of ULTRA STARTER
- The Ultra Starter is not subsidiary battery. Exclusive Starting Device for Car.
- Perfect starting at low temperatures (30°C below zero) and low voltage (9V)
- 30% increase of performance of existing battery, Usage Period is extended by 50%
- Black box / Restriction device for idling / Always start fastly even when discharged by electric appliances
- High starting power and battery discharge prevention when car is started
- Provides constant voltage at start, does not overload start motor
- Semi-permanent use is available with re-use when battery is replaced. No any extra starting device is needed when it is discharged.
If you use it with idling limit device, bigger effect is provided.
It is effective in such cars!
1. Starting Car is so difficult especially during cold weather.
2. Car with Idle limiter (ISG) and black box use
3. Car with a lot of electronic devices which load so highly to battery.
4. Car with low and weak voltage from old battery.
5. Driver who is afraid of starting car due to discharge
Features and Benefits
- The ultra starter does not need to be installed separately whenever discharging starting is required.
One Installation is going on till scraping a car.
- The ultra starter is charged normally (within 20 seconds of charging time) and supplies high power and starts car perfectly.
- The Ultra Starter is not subsidiary battery and jump starter. It is exclusive car starter and there has been no such a device.
- The Ultra Starter is essential device for car which has starting difficulties in winter or frequent turn-off.
- Ultra starter does not need to be charged separately. It is automatically charged with existing battery.
- After start-up, the ultra starter is automatically charged and 20 seconds later relays in a body is operated and prevent discharge.
- Spark does not occur during installation. The relay of the ultra starter cuts power off.
- Ultra starter and existing battery compliments each other well and provides soft and fast starting.
- Ultra capacitor in Ultra Starter has a life span of 500,000 times and can be used semi-permanently.
Installation method and order
1. Open the bonnet of Car and check the location to install for ultra starter next to the existing battery.
2. Unscrew the existing battery terminal and connect the black wire of the ultra starter to the the battery "- terminal"
and the red wire to the battery "+ terminal".
3. After connecting, fasten the battery screw hardly and don't let the Ultra Starter Cable be shaken.
4. Connect the yellow signal wire of Ultra Starter to starter relay in fuse box.
5. After installation, fasten the Ultra Starter with fixing tie not to be shaken.
Ultra Starter Connection Tips!
After disconnection of starter relay in fuse box, stick (No. 30 or No. 87) starter relay again to the area where there is no sound of contact of relay of inside of Ultra Starter such like connect and disconnect when yellow signal wire of Ultra Starter is connected to starter relay.