The spacing between each tier can be adjusted through the height position of the horizontal x-frame (round pipe).
The basket and plate should be hung on the x-frame and their positions can be adjusted depending on the width set by the user.
The sink rack can be installed snugly to the wall by using the support fixture height adjustment components made in consideration for projections at the back of the sink.
(Utility model registration No. 20-0473194, Sink rack height adjustment tool)
The basket and plate can be placed or removed easily from the x-frame according to need, and the basket comes with a water trap on the bottom, which allows the basket to be used as a separate dish rack.
The basket is good for storing tableware such as plates because of its tight steel wire placements, and connected junctions, which are prone to contamination, were only placed on the side to minimize the accumulation of contaminative substances.
The plate is suitable for storing easily breakable glass cups or containers with round bottoms.
If frequency of use or storage amount of small, the rack can be set up vertically over the sink by reducing width, allowing the rack to be utilized in various forms.
2 Basket/Water trap, 3 plates, 2 supports, 4 round pipes, 8 each of bolt/washer, 4 silicon covers, 2 sets of height adjustment tools
*(W)52~90 x (D)25 x (H)49 cm