Description
- Approved by Korea Gas Safety Corporation, this product is installed in areas with risk of poisonous gas leaks, oxygen deficiency, and flammable gas leaks to safely and continuously detect the gas leak rate.
- With a highly sensitive electrochemical detection method, this product exhibits the best performance in low concentration gas detection. This device is made specifically to detect oxygen and toxic gas, and it minimizes malfunction due to obstructing gas.
Features
-Minimizes interference caused by environmental changes such as external noise, temperature, humidity, pressure, etc.
-Long-term credibility guaranteed (long life, high sensitivity, excellent selectivity, stability, straightness, etc.)
-Single person calibration and maintenance work possible
-Signal for amount of gas leak detected through standard output (4-20mA DC) internalization can be transmitted at a long distance to the receiver, DCS SYSTEM, GAS VISION, etc. (2,500M).
Specification
Measuring gas: Toxic gas, combustible gas
Measuring Type: Catalytic Type, Electro-Chemical Wet Cell Type
Detection type: Diffusion Type
Detection range: 0 - 100 % LEL & 0 – n PPM
Operating temperature: -20℃ ~ +50℃
Operating humidity: 5 to 95% RH (Non-condensing)
Measurement signal: 4 - 20 mA.DC/Full Scale
Others
Accuracy: within ±3 % / Full Scale
Power: within 18 - 31V/DC
Signal transmission distance: within 2.5Km
Connecting cable: CVVS or CVVSB 0.75㎟~2.0㎟ (3 Wire)
Wire conduit: 1/2" or 3/4" PF NPT
Installation: Wall or 2" Pipe Station
Approval: Ex dIIC T6/Korea Gas Safety Corporation
External measurements: 170W X 130L X 75H (mm)