1. This product is only applicable to battery VOLTA models manufactured by LG Energy Solutions, Ltd.
2. The detachable battery can be charged by connecting to the mobile charger manufactured by e-BOX.
3. The charger is connected to the BMS of battery by CAN communication to control and
supports constant current mode(CC Mode) and constant voltage(CV Mode) of charging.
4. It takes a certain amount of time to reach the target current during CC Mode.
In CV Mode, the charger is charged based on voltage and finishs charging by the
charging termination conditions received from BMS.
5. Charging control is performed based on the limited voltage and current provided by
BMS in both CC Mode and CV Mode.
HOW TO USE
< Start of Charging >
1. Connect the charging cable of the mobile charger to the rear connector of the cradle charger.
2. Connect the power adapter to the cradle charger connector.
3. Press the power switch on the cradle charger.
4. Make sure that the battery and mobile charger are connected and turn on the power switch of the mobile charger.
5. Check the light on the LED to verify that the charging operation is normal.
< End of charging >
1. Press the charge ON/OFF button for at least 2 seconds to end the charge.
2. After full charge, Remove the battery from the charging port.
3. Turn off the mobile charger power switch.
4. Disconnect the charging cable and power adapter from the connector of the cradle charger.
Power |
Rated power |
600W x 2ch |
Input Voltage |
AC 220V , 1Phase, 50/60Hz |
|
Output Voltage |
48V |
|
Output Current |
8.64A |
|
Enclosure |
Material |
PCB, CIRCUIT, PA66 |
Operating Tempature |
-20~60℃ |
|
Cooling |
Fan |
|
Dimension |
405x280x185 mm |
|
Weight |
4kgs |
|
Cable Length |
1270mm (±3.0%) |
The person in charge
HYUNGWOO SHIMAddress
13 Paldal-ro, Buk-gu, Daegu (41498)큐알
Please enter the text on the left image to prevent automatic input.
0 / 4000