N₂ PSA generator utilizes the properties of CMS(Carbon Molecular Sieve) to separate nitrogen in air. CMS has the adsorption pore which adsorbs oxygen faster & more than nitrogen from the air. The whole process of nitrogen generator consists of Pressurization, Production, Equilibrium of pressure, Cleaning and Purge.

Injection molding, Purge, Laser cutting, Fire extinguisher, Packing, Beer, Heat treatment, Soldering, Reflow, Photo Lab and Electronics

1. Air Compressor
 Air compressor is the used to produce compressed air. Compressed air is used for separating nitrogen from air. In the process of compression, moisture and heat happen. To remove them, built-in or independent air dryer and after-cooler are necessary.

2. Air Receiver Tank
 Air receiver tank is the equipment used to keep supplying the compressed air of certain pressure to the nitrogen generator stably. It is also for the purpose of handling the load of compressor properly.

3. Filter
 It is used for removing dust, particle and oil, etc. in compressed air

4. Desiccant Air dryer
 This is used for removing moisture by using adsorbent. it consists of two adsorbers and it has the repeated cycles of adsorption and regeneration.

5. PSA generator
 In order to separate nitrogen from the compressed air, CMS(Carbon Molecular Sieve) is used as adsorbent, PSA system consist of pressurization, production, purge, equilibrium of pressure and regeneration.

6. Nitrogen Storage Tank
 It is a buffer (storage) tank used to supple the oxygen certain pressure, flow, purity.

7. LCP(Local Control Panel)
 LCP has control of the whole system into operating manually or automatically. It also indicates purity, pressure and flow of the produced nitrogen.

8. Nitrogen supply
 The purity of the produced nitrogen is up to 99%, flow and pressure depend on customer's needs.

9. LN2 Storage tank
 It is the equipment for storing liquid nitrogen.

10. LN2 vaporizer
 It is the equipment for changing nitrogen from liquid into gas through vaporization.

11. Gas supply unit
 In order to supply vaporized nitrogen with the certain pressure

12. LCP
 It controls the heater that is used when the vaporized nitrogen of certain temperature is required.

Model	N2 Flow (Nm3/h)	Size(W*D*H)	Weight (Kg)
N-5	5	545*520*1461	287
N-7	7	685*570*1388	356
N-10	10	685*570*1743	432
N-15	15	800*640*1811	563
N-20	20	850*680*1906	647
N-25	25	850*680*2238	802
N-30	30	940*830*2152	925
N-40	40	1080*812*2229	1120
N-50	50	1080*812*2619	1318
N-70	70	1324*1108*2976	1588
N-100	100	1418*1160*3422	2096
N-120	120	1519*1210*3340	2396
N-150	150	1722*1311*3331	3109
N-180	180	1824*1363*3642	3572
N-200	200	2126*1513*3387	3955
N-250	250	2329*1615*3426	4753
N-300	300	2532*1717*3444	5506
N-350	350	2735*1818*3474	6273
N-400	400	2938*2019*3485	7008
N-500	500	3239*2145*3564	8440

- Inlet Air: 100 PSIG, Output Productive Pressure: 70 PSIG
- Voltage:220V / 60 (50)Hz / 1 Phase
- Purity: 99.9% (up to 99.999% available without purifier)
- Capacity: more than 3000 Nm3/h available

Customization. If you want to know specific information, please contact me. We are able to meet any requirements.

Company Overview