Cut Wire

Payment

T/T
MOQ

1 meter (m)
Supply Ability

1,000 meter (m) per One-Time
Supply Details

Customization Sample Order

Quote Inquiry
Country of sale

Asia, Americas, Europe, Middle East, Africa
Catalogue Etc attached Video Clip
PRICE
- FOB
  
  USD 1.00 ~ 4.00
  
  (1 meter (m))

Description
Shipping&Payments
Company Introduction
POC SUGGESTIONS
(PROOF OF CONCEPT)
Product Reviews

ITEM SPECIFICS

Brand

ANY BALL

Model Cut Wire
origin

Republic of Korea
Size(Capacity)

table reference
Material

carbon steel / stainless steel
Function

abrasive
Color

natural
Features

durability
Gender

all

PRODUCT DESCRIPTION

Introduction
*Wire blast carbon steel and wire blast stainless steel can be used in the following three areas.
1) Cutting use (cylindrical shape with sharp edge)
2) Section state (corners are round)
3) Integral state (ball shape)

*The stainless steel of wire blast becomes tougher the longer it is used. Therefore, it can be used as an abradant for much longer time.
• Composition: High carbon reduced wire
• Complete strong body, long-lasting
• Shot treatment time reduced more than 2 times compared to steel ball because of excellent rebound property
• Strong shock impact, product's surface color is natural
• Chemical analysis & HRC

Features
The cut wire shot is such that is produced by cutting 0.45 to 0.7% high carbon steel wire into a specific length. As it has the hardness distribution of 40 to 60, with high strength and durability, it has longer life than any other shot products. In addition, as its particles have the uniform size, it is at least 2 times faster than the cast steel shot product. The features of cut wire shot product are as follows;

1. It increases the descaling property by hitting hard the workpiece without energy loss as it is very close to a perfect rigid body with high material and specific gravity of 7.85.
2. It has longer life as it is highly resistant to impact, abrasion and fatigue (approximately 2 time longer than steel shot products).
3. It has high rebound property as it is highly elastic and produces high cleaning efficiency as its shape is large and complicated.
4. The size of its particles is uniform, which enables control of particle distribution in a machine.
5. The speed of cleaning is at least 2 times faster than other shot products.
6. It does not produce fragments as it is a perfect rigid object, which reduces the abrasion of components in a machine, resulting in reduction of maintenance costs.

Spec

Technical Details			Hard level (HRC)		Analysis telluric
Type (SAEJ411)	Size	Variation	Kyong Sung	SAE J441	Analysis telluric
KCW2	0.2	0.15~0.24	48MIN
KCW3	0.3	0.25~0.35	48MIN	48MIN	Carbon	0.45~0.72
KCW4 (CW-20)	0.4	0.36~0.44	48MIN	48MIN	MANGANESS	0.60~1.20
KCW6 (CW-23)	0.6	0.57~0.63	46MIN	48MIN	SILICON	0.10~0.30
KCW8 (CW-32)	0.8	0.78~0.82	44MIN	45MIN	PHOSPHORUS	0.045MAX
KCW10 (CW-41)	1.0	0.98~1.02	43MIN	42MIN	SULPHUR	0,050MAX
KCW12 (CW-47)	1.2	1.18~1.22	42MIN	41MIN
KCW14 (CW-54)	1.4	1.38~1.42	40MIN	39MIN
KCW16 (CW-62)	1.6	1.58~1.62	40MIN	36MIN
KCW20	2.0	1.98~2.02	38MIN
KCW22	2.2	2.18~2.22	38MIN

Etc
It is a method of hitting the surface of a workpiece by ejecting shots or grits at a speed of approximately 100m/sec to the workpiece. The ejecting methods are mainly divided into the air blast method that uses compressed air and the airless blast that uses an impeller. The ejected shot is automatically collected immediately, and supplies to the ejector after removing foreign substance or dust on it, and this process is repeated thousands times.